Izdelki za oprema za embalažo (176)

Semi-automatic line consisting of taping machine FP9036 with side straps (or FP9037 with straps above and below) for closing the upper and lower flap of the box and special plan for loading products. To facilitate the packaging operation of the products, an idle conveyor roller with boxes-stopper plan has been positioned before the taping machine. In this way it is possible to block and fill securely, quickly and easily the box not yet taped simply taking the products from a plan or from an adjacent container. Then, with a simple push, the operator will move the box in the taping machine. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1080 mm (1880 with rollers) height:1470 mm (with taping head) working height:580-780 mm Weight:113 kg Belt Drive:left and right

Idler roller conveyors made of a sturdy structure in painted steel, supports with adjustable and height-adjustable feet, galvanized steel rollers with rotation on shielded ball bearings. In this position a convenient and economic box holder has been installed and allows the operator to lock and fill the box in comfort. Once the filling is complete, the operator can detach the box by simply pushing it forward. Dimensions min. (LxWxH):150 x 100 x 100 mm Dimensions max. (LxWxH):unlimited x 500 x 500 mm lenght:1000 mm height:mm. 1000 working height:650 mm Weight:125 kg Belt Drive:left and right

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine. Sealing bar length:mm 400 Sealing width:mm 10 Chamber size:mm 400 x 85/180 x 350H Maximal product height:mm 300 Vacuum pump:20 m³/h Cycle Time:about 25 sec.

Le reggiatrici Bocedi orizzontali e verticali con e senza compattatore di carico, sono prodotte utilizzando tutta l’esperienza maturata negli anni di presenza nel mercato globale. Sono uno strumento indispensabile per stabilizzare e compattare il carico pallettizzato. Forti ed affidabili Tutte le reggiatrici Bocedi possono essere facilmente integrate in linee di confezionamento già esistenti o possono operare autonomamente. Entrambe le versioni, orizzontale o verticale, sono disponibili in configurazione automatica o semiautomatica, caratteristica che le rende ideali per qualsiasi tipo di industria. Le Reggiatrici stabilizzano il carico per mezzo di regge di Polipropilene (PP) e Poliestere (PET). Sono macchine facili da utilizzare, intuitive e personalizzabili a seconda del ciclo di confezionamento. Tutte le versioni di reggiatrici sono accessoriabili con dispositivi mettiangolare, compattatore e presse. Capacità:180+ pallet/ora Dimensioni minime pallet:600×800 mm Dimensioni massime pallet:1800×1200 mm

Il centratore installato prima della macchina reggiatrice o incappucciatrice, sistema il carico nella posizione corretta sulla linea di trasporto, per poter avere un imballo preciso ed uniforme su tutti i lati. Un carico centrato permette infatti alle reggiatrici e alle incappucciatrici a cappuccio elastico o termoretraibile di poter lavorare in modo uniforme su tutti i lati della merce, conferendo ottima stabilità al carico.

Dolzan propone una soluzione compatta e agile per riempire e sigillare capsule di caffè, the e altri prodotti polverosi. Richiedi la tua consulenza personalizzata scrivendo all'indirizzo dolzan@dolzan.com

Disponibili in configurazione orizzontale o verticale, le presse sono un accessorio ideale quando il carico deve essere compattato. Le presse orizzontali sono ideali per compattare la merce riducendo o azzerando gli spazi vuoti tra i singoli prodotti pallettizzati. Le presse verticali vengono solitamente impiegate per ridurre il volume e compattare i carichi di sacchi. La pressa è un accessorio strategico, che contribuisce a stabilizzare il carico, rendendo molto più facili le operazioni di stoccaggio e trasporto.

Bocedi offre una vasta gamma di sistemi di trasporto per personalizzare e completare al meglio ogni sistema di imballaggio di fine linea. Trasporti a tendina, tappeto, rulli, tapparella o catena, tutti configurabili per stabilizzare al meglio il carico durante la movimentazione tra le fasi dell’imballaggio. Tutti i nastri trasportatori possono essere regolati in altezza, per adattarsi al meglio ad impianti esistenti. Le linee di trasporto possono essere complete di piattaforme rotanti e stazioni di sollevamento.

Compact angular automatic shrink wrappers , with shrink tunnel included in the same structure as the sealing machine. Each adjustment is automatic and can be stored. Available 20 electronic memory pages, for 20 different product formats, which can be extended to 40 upon request. So-called “monolithic” sealing system, with sealing knife. This guarantees a very clean, thin, but at the same time very resistant welding line. The monolithic welder offers not only a high quality weld, but also very fast welding times, which benefits productivity. Speed ​​of the conveyor belts linked to all other linear speeds of the machine. Belt speed adjustable from 8 to 28 meters / minute. All these features combine to ensure high productivity . The Auto 40 Unica and Auto 60 Unica automatic angular packaging machines can work both as independent machines and inserted in an automatic line . In the first case, loading is manual, by an operator. While, in the second case, loading takes place

The constant supply and prompt availability of spare parts are a distinctive feature of Pactur. This aspect is closely linked to the possibility of providing immediate assistance. In fact, Pactur's warehouse is always well stocked. On our shelves you can find not only the spare parts of the machines currently in production, but also those of the more obsolete machines. If spare parts for discontinued machines are no longer available, we have the option of replacing them with interchangeable parts. The evolution of spare parts in our history has always taken into account how important the interchangeability of components is. In fact, the philosophy of Pactur, the philosophy of the " Ladies Machines " is based not only on the quality of the packaging machines, but also on the service.

Confezionatrici automatiche con saldatore in continuo, per il confezionamento di prodotti di qualsiasi lunghezza, grazie al saldatore rotante laterale. Sono disponibili quattro modelli, con barra saldante trasversale di diversa larghezza: Auto 30/L, Auto 40/L, Auto 60/L e Auto 80/L. Confezionatrici automatiche con saldatore in continuo, per film termoretraibile, adatte per uso di film sia Poliolefina PO, sia Polietilene PE. Con prodotti di medie-grandi dimensioni, raggiungono prestazioni elevate. L’apertura del gruppo saldatore è regolabile, per ottimizzare i tempi di confezionamento e incrementare, quindi, la produttività, in funzione dell’altezza prodotto. Inoltre, in tal modo la linea di saldatura cade sempre alla metà dell’altezza prodotto. Le confezionatrici automatiche con saldatore in continuo sono dotate di 20 pagine per la memorizzazione di 20 formati, con conseguente cambio formato automatico in pochi secondi.

Confezionatrici automatiche angolari compatte, con tunnel di termoretrazione incluso nella medesima struttura della saldatrice. Auto 40 Unica e Auto 60 Unica sono macchine completamente automatiche. Ogni regolazione è automatica e memorizzabile. Disponibili 20 pagine di memoria elettronica, per 20 diversi formati di prodotto, che possono essere estesi a 40 su richiesta. Sistema saldante cosiddetto “monolitico”, con coltello saldante. Questo garantisce una linea di saldatura molto netta, sottile, ma contemporaneamente molto resistente. Il saldatore monolitico offre non solo una saldatura di alta qualità, ma anche tempi di saldatura molto rapidi, a tutto vantaggio della produttività. Velocità dei nastri trasportatori collegata a tutte le altre velocità lineari della macchina. Velocità dei nastri regolabile da 8 a 28 metri / minuto. Tutte queste caratteristiche concorrono a garantire un’alta produttività.

innovativo layout della macchina con il tunnel di termoretrazione in linea - La gamma delle Confezionatrici Semiautomatiche Lineari Mod. 45/AL2 LINE – 65/A2 LINE di Pactur si rinnova, con l’integrazione di un nuovo segmento di produzione: le confezionatrici semiautomatiche lineari, prodotte nei modelli 45/AL2 LINE e 65/A2 LINE. I principi costruttivi, utilizzati per la saldatura e la termoretrazione, sono identici a quelli della gamma tradizionale a 90°. Mentre l’innovazione risiede nel layout della macchina: il tunnel di termoretrazione, anziché essere collocato a 90°, rispetto all’inserimento del prodotto, si trova in linea. Quindi, lo scorrimento del prodotto è lineare, da destra a sinistra. Pertanto, la confezionatrice può essere addossata a una parete libera e in tal modo occupa meno spazio circolare. Il braccio saldatore è automatico ed elettromeccanico, per cui non richiede aria compressa. Sono presenti sulla macchina tre comandi del braccio saldante: pulsanti, pedale e temporizzatore.

The range of Semiautomatic Linear Packaging Machines Mod. 45 and 65/A2 LINE by Pactur is renewed, with the integration of a new production segment: the semiautomatic linear packaging machines, produced in the 45 and 65/A2 LINE models and in the special customized version for large formats such as 140/A2 LINE ( ​​see video ). The construction principles, used for welding and heat-shrinking, are identical to those of the traditional 90° range. While the innovation lies in the layout of the machine: the heat-shrinking tunnel, instead of being placed at 90° with respect to the insertion of the product, is located in line. Thus, product scrolling is linear, from right to left. Therefore, the packaging machine can be placed against a free wall and thus takes up less circular space. The welding arm is automatic and electromechanical, so it does not require compressed air. There are three sealing arm controls on the machine: buttons, pedal and timer.

Confezionatrice automatica angolare, con tunnel di termoretrazione incluso. Medie dimensioni. 20 memorie e cambio formato automatico.

La discesa della campana è manuale e la riapertura è gestita da magnete, dopo un tempo programmabile. Sistema di saldatura tradizionale Pactur, uniformato a quello dei modelli manuali e semiautomatici. Lama saldante piegata a 90°, per una perfetta saldatura anche in angolo. Sistema di saldatura con autoregolazione, collaudato da più di trent’anni di esperienza Pactur. Infatti, la durata dell’impulso di saldatura è in funzione alla temperatura della lama di taglio. Pertanto un maggiore utilizzo della macchina comporta una riduzione dell’impulso di saldatura. Regolazione in altezza del piano di lavoro,il che consente la centratura della saldatura a metà altezza prodotto. Inoltre, questa regolazione è fondamentale per un utilizzo equo di entrambi i lembi della bobina di film. Potente ventola per la termoretrazione. La potente retrazione permette sia l’uso di film più spessi, sia un ottimo risultato estetico con film più sottili. Riscaldamento a mezzo di speciali resistenze corazzate.

for the packaging of products of any length, thanks to the lateral rotating sealer. Four models are available, with transverse sealing bars of different widths: Auto 30/L, Auto 40/L, Auto 60/L and Auto 80/L. Automatic packaging machines with continuous welder, for shrink film, suitable for both film use Polyolefin PO, both Polyethylene PE. With medium-large products, they achieve high performance. The opening of the sealing group is adjustable, to optimize packaging times and therefore increase productivity, according to the height of the product. Furthermore, in this way the welding line always falls at half of the product height. The automatic packaging machines with continuous sealer are equipped with 20 pages for memorizing 20 formats, with consequent automatic format change in a few seconds. In strict observance of CE regulations, metal protective casings completely close the machine. It is possible to connect the automatic continuous packaging machine to a heat-shrinking tunnel

Place the pallet on the platform and hook the stretch film to the base then press the start button. The platform begins to rotate, after 2-3 turns operate the button for coil ascent. After reaching the desired height, stop the lifting of the reel and after 2-3 turns stop the machine or operate the descent of the reel and carry out the winding up to the base of the pallet. At the end of wrapping, press the stop button and cut the film. On request we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic scale integrated STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. Maximum load:Kg. 2000 Max pallet height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75

The F1000 carton erector is used when a large number of boxes of the same size are to be formed. With the erector it is possible to form the boxes and accumulate them in a specific area of ​​the warehouse, ready for use. By combining the erector with a line (taping base, filling surface and taping machine) it is possible to create the boxes as they are needed, without taking up space for accumulation. The erector automatically forms the boxes by taking them from the side magazine and folding the four lower flaps. The settings regarding box size, speed, etc. are all settable via a convenient front panel. Operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F1000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box. Productivity max:840 pieces/hour Box transfer speed:about 22 m/min Compressed air supply:6 Bar, 13 Nl per cycle Working plan height:mm 650 + 30 Charger capacity:110/120 boxes

Semi-automatic wrapping machine mod. FP BOX with rotating table, suitable for wrapping boxes and small packages. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The standard table has the turntable completely smooth. You can request the non-slip rubber coating or different locking systems of the pack. Current promotion: The FPBOX wrapping machine for boxes is supplied with a free inverter that allows the adjustment of the rotation speed of the rotary table from 10 to 20 rpm Max load weight:200 Kg Turntable diameter:mm. 1000 Max. load size:mm. 800 x 800 x 1000 h Film roll size:manual film diam. max mm. 140 Electrical supply:220 V. 50 Hz Installed power:Kw 0,37 Weight:200 Kg machine size :1600x1000x1800 h

Wrapping machine with turntable FP ECO ROLL for wrapping carriages (roll container), with hooking / manual cutting of the film and buttons for ascent/descent of the reel, guide carriages, foot operated mechanical lock, loading ramp for pallet trucks, progressive starting device. (Machine CE). Maximum load:Kg. 2000 Rotaring table speed:4 - 7 rpm Maximum dimensions trolley:mm. 800 x 1200 (600 x 1400) Max trolley height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V - 50Hz Installed electric power:Kw 0,4 Machine dimensions:mm. 1500 x 2050 x 2450 h Weight:Kg. 35

CARTON SEALER MACHINE MOD. FP 9037 - UPPER AND LOWER BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake. Dimensions of the boxes to be taped (WxLxH):Min 200 x 150 x 100 mm Max 500 x unlimited x 500 mm Tape width:50 mm (75 optional) Type tape:Polipropilene - PVC Operation speed:20 m/min Belt drive:Upper/Lower

Impilatori automatici e magazzini di pallet vuoti, capaci di lavorare con varie tipologie e forme di pallet.

PRATIKA 55 SMART: AUTOMATIC THERMORETRAIBLE PACKAGING MACHINE WITH INCORPORATED TUNNEL The new model of automatic shrink-wrapping machine Pratika 55 Smart comes from a careful attention to the needs, with the aim of offering a technologically advanced but flexible and extremely compact product. The included tunnel, revolutionary in the world of automatic machines, responds to the needs of space, but above all to reduce the labor costs to a minimum, thanks to the patented "come back" option to a single operator. Enhanced by a strong mechanical and electronic technological content, the new Pratika 55 Smart represents a perfect synthesis of reliability, versatility and safety, which once again evolves the way to conceive the compact automatic operation shrinkwrappers. Power supply:400 V 3 ph + N Max installed power (including tunnel):7.5 kW Hourly production:0-1200 pz/h Max. product size:mm. 400x420x120h Max. reel size:300 mm (diameter) Max. reel band size:600 mm (width) Worktable height:870 mm (h. infeed conveyor) machine size :2390x1190x1680h. Mm Usable films Polyolefins:9-38 microns machine weight:677 / 813 kg

Automatic strapping machine mod. TP 101, simple and reliable, is an excellent solution for strapping of packages handled by an operator. The positioning of the material to be strapped can be done manually or by means of an idle roller. The operator lunch the strapping by simply pressing the foot control or the start button. The strap is stretched, thermally welded and cut. The arch strap guide is in aluminum. The strapping tool is characterized by a new sealing blade for maximum effectiveness of the closure and an external knob to easily adjust the tension. Worktop with idle rollers. Operation with Mitsubishi PLC, the strapping machine turns off automatically after 60 seconds of inactivity. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:200 Kg

AUTOMATIC CASE ERECTORS Semi-automatic carton erector for closing the bottom flaps of the box Max. sixe mm. 520x520x700 or mm 670x670x800. The Pack Point is a case erector that, assisted by an operator, automatically folds the four bottom flaps of an American box. In few seconds the carton is ready for the operator to fill: while holding the case, Pack Point allows the operator to use both hands for placing the product into the carton. When the carton is filled, the operator presses a button and the PP automatically transfers the carton into a case sealer for top and bottom sealing. The Pack Point can be linked to a Gem 520/670 (bottom taper) so that boxes can be easily sent to filling lines by motorized conveyors. The machine is equipped with 4 wheels with brakes. Example model:PACKPOINT 520 Box size:Length from 150 to 700 mm Width from 110 to 520 mm Height from 120 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:4 bar Air consumption:13 nl/min Work surface height:650 mm

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating. Working surface sizes:mm. 540 x 390 Max. package height:mm. 140 Film roll width:mm. 450 Power max:Kw 6 Power supply:380 V 3PH machine size :mm.1500 x 600 xh1350

Il palettizzatore EASYWRAP avvolge con films estensibili i Vostri prodotti sistemati su bancali, assicurando stabilità durante il trasporto.

PACK POINT 08 - CASE ERECTOR Semiautomatic carton erector. It forms the bottom of uniform size batches of American type boxes, with operator. Operation is simple , just insert the open box in the case erector. The four bottom flaps are folded and the box is automatically locked in position for filling. A pneumatic pusher makes the expulsion of the box to a taping machine . The PACK POINT 08 when combined with a taping machine is a compact and productive semi-automatic packaging line. The machine is equipped with 4 wheels with brakes. Box Size:Length from 180 to 650 mm Box Size:Width from 140 to 520 mm Box Size:Height from 100 to 520 mm Maximum production rate:300 boxes/h Compressed air supply:5 bar Consumption per cycle:7,5 nl Work surface height:650 mm

BSL 5045 SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Angular packaging machines with manual or automatic closing of the sealing bar and motorized product unloading belt. They can be combined with a retraction tunnel. FEATURES: - Sealing blade in NI-CR with non-stick coating - Control of the welding time to avoid overheating - Conveyor belt adjustable in height by handwheel - Double magnet for high closing force - Reel holder sliding on ball bearing guides, useful width mm. 550 - Return of the sealing bar controlled by a gas spring (for the 5045 L manual version) - Pneumatic device (compressed air) for closing and opening the sealing bar (for the BSL 5045 LA semi-automatic version) The BSL 5045 LA model is equipped with a maintained action dual control (the two buttons must be held down until the bars are completely closed). Example model:BSL 5045 LA Max. Sealing Size (L×H)(mm):500x450 Support plan size (L×W) (mm):450x400 H max. product (mm):250 Compressed air (bar):5-6 Maximal reel width (mm):550 Maximal hourly production (pz.):900